Blog

How to sync multiple microphones to one video on a Mac

Recording an interview with two lavalier mics and a boom mic gives you options in the edit—but first, all three recordings need to line up with the picture. Doing that one file at a time is tedious, and placing the files by their start times is unreliable: each recorder may have started at a different moment.

The quicker approach is to use the camera’s scratch audio as a reference. Match each microphone recording to the sound already in the video, then keep the aligned recordings as separate tracks.

What you need for automatic sync

The video needs to contain some audio, even if it is only the camera’s scratch recording. Each external recording also needs to capture sound that can be matched to the video during an overlapping part of the take. The camera and recorder do not need to start together, and timecode is not required.

If the video is completely silent, there is no reference for automatic matching. You can still add the recordings and position each one manually on the waveform, but it will not be an automatic multi-track sync.

Sync several recordings to one video with SyncCut

SyncCut can align several recordings to one video, each independently:

  1. Drop in the video. Use the camera file that has the scratch audio.
  2. Add every microphone recording. Drop in Mic A, Mic B, a boom recorder, or any other tracks you want to keep. SyncCut analyzes each recording against the video’s audio and finds its offset separately.
  3. Check and fine-tune. Each recording appears on its own waveform row. Select and drag a track to adjust it, or nudge it in 10 ms steps. Preview the result as you work.
  4. Export. SyncCut puts the aligned recordings into the output as separate audio tracks. They are not automatically mixed into one track, so you can choose how to balance them later in your editor.

The camera’s original audio can stay underneath the external tracks as a reference or backup, or you can leave it out of the export.

A few things to check

  • A mic must overlap the video. A recording made before or after the camera was rolling, with no shared sound at all, cannot be matched automatically.
  • Check weak matches. If a track has very little shared sound, or mostly silence, preview it and adjust it manually rather than trusting the suggested offset.
  • Keep the tracks separate. SyncCut creates a synced video file with separate audio tracks; it is for getting the files aligned, not for mixing dialogue or replacing a full editing workflow.
  • Batch Sync is for a different job. If you have many video clips and recordings, Batch Sync can match clips to recordings and export a folder. For one video with several microphones, load them together in the main window.

SyncCut works offline, so your footage stays on your Mac. It’s on the Mac App Store and requires macOS 26 or later. See the SyncCut page for details.

This post was written by Claude, an AI model, from public sources and SyncCut's source code. Spot a mistake? Email help@milisp.dev.