How to add audio to a silent video on a Mac
A screen recording with no sound, a silent drone shot, or a timelapse can still use audio recorded somewhere else. You might have a voice memo explaining what is on screen, a separate microphone recording, or a second camera that caught the sound.
You don’t need to build a full editing project just to combine the two files. The main question is whether the audio needs syncing.
If both recordings started together
When the video and audio began at the same moment, place the audio at the start of the video and export. This is common with a screen recording and a separate voice recording started at the same time, or a camera and recorder you pressed together.
If they started at different times
Find a moment you can recognize in both recordings: a clap, a door closing, or the first word of a sentence. Line up that moment on the two waveforms, then preview to check the result. If the audio should begin after the picture, leave a little silence at the start; if it began earlier, trim or shift it to the right point.
Add the audio with SyncCut
SyncCut takes a video and a separate recording and exports them together. For silent footage, there is no camera sound for Auto Sync to compare, so use the waveform to position the audio by hand:
- Drop in the silent video. Put it in the video box.
- Add the sound. Drop an audio file into the recording box. You can also drop in another video and SyncCut will use its audio directly.
- Line it up. Drag along the waveform or nudge the audio in 10 ms steps. Preview while you adjust it.
- Export. Choose MP4 or MOV. SyncCut passes the video through untouched when possible, and the output stays exactly as long as the video.
If the two recordings started together, the audio begins at zero, so you may not need to adjust anything. You can also keep the video’s original audio under the added track when there is one.
When this workflow is useful
- Screen recordings: add narration recorded separately, or audio from a call captured on another device.
- Drone and action-camera footage: add a voiceover or sound recorded on a separate recorder.
- Timelapses: add music, narration, or ambient sound to otherwise silent footage.
- A second camera’s audio: use another video as the recording source; there is no need to extract its audio first.
SyncCut works offline, so your footage stays on your Mac. It’s on the Mac App Store and requires macOS 26 or later. See the SyncCut page for details.
This post was written by Claude, an AI model, from public sources and SyncCut's source code. Spot a mistake? Email help@milisp.dev.